Transportation Die Casting Services

Precision die cast components for automotive and transportation applications. Aluminum, magnesium, and zinc alloys engineered for the most demanding environments.

Trusted by the companies

ISO 9001:2015

ISO 13485:2016

AS9100D

ITAR Registered

NADCAP Accredited

Why Transportation Engineers Choose Die Casting

Where other metal manufacturing processes require multiple operations to achieve a finished geometry, high pressure die casting produces near-net-shape parts in a single machine cycle. That efficiency compounds quickly across a production run: less material removed, fewer setups, shorter lead times, and lower per-part cost at volume.

Die casting also gives design engineers freedom that machining cannot match. Complex internal cavities, integrated bosses, thin walls, and organic geometry are all achievable within one mold tool.

Design Freedom

Net-shape designs with complex cavities in a single machine cycle

Cost-Effective

High-pressure casting minimizes material waste and post-machining time

Lightweight

Aluminum, magnesium, and zinc alloys cut vehicle weight without sacrificing strength

Quality Certified

IATF 16949 and ISO 9001 ensure every part meets spec, documented and traceable

Surface Finishing

Anodizing, powder coating, painting, plating, and conversion coatings available

Global Scale

International facilities, consistent output, local engineering expertise

Alloys Engineered for Transportation Demands

Material selection is a structural decision, not just a cost decision. The right alloy affects fatigue life, thermal performance, corrosion behavior, and how the finished part responds to secondary operations.

Process

Cold-Chamber Process

Aluminum alloys dominate structural transportation applications due to their high strength-to-weight ratio and thermal conductivity. They excel in powertrain housings, suspension nodes, and EV battery tray structures where heat dissipation matters as much as load-bearing performance.

Aluminum requires a cold-chamber die casting machine because of its higher melt temperature, supporting a wide range of part sizes from small precision inserts up to large structural castings measured in kilograms.

ASTM A356ASTM A360ASTM A380ASTM A383JIS ADC1JIS ADC3JIS ADC6JIS ADC10

01

Best Applications

Best Applications Structural housings, engine covers, EV battery enclosures, suspension components, powertrain covers

02

Key Property Advantage

Outstanding strength-to-weight ratio with excellent thermal conductivity critical for powertrain thermal management in EV and ICE platforms

03

Alloy Selection Note

A380/A383 for general use; A360 for corrosion-critical exterior applications; A356 where ductility and pressure tightness are required

Transportation Die Casting Applications

Die casting parts appear throughout the modern vehicle. Wherever engineers need complex geometry, controlled weight, and reliable repeatability across large production volumes.

Powertrain and Drivetrain

Die casting is the dominant manufacturing process for powertrain housings across both internal combustion and electric vehicle platforms. Thermal management requirements make aluminum the material of choice.
  • Engine housings and valve covers
  • Transmission cases and hydraulic valve bodies
  • Electric drive unit and motor housings
  • Oil pump bodies and filter housings
  • Gearbox end covers
  • Differential housings

Chassis and Structural

Structural die castings reduce vehicle weight at critical chassis nodes where steel assemblies previously dominated. Part consolidation is the key value fewer components, tighter tolerances.
  • Suspension brackets and knuckles
  • Subframe cross-members and junction nodes
  • Battery enclosure structures for EVs
  • Seat frame structural members
  • Control arm brackets
  • Shock tower reinforcements

Body and Closure Systems

From liftgates to door mechanisms, body system components combine functional precision with surface finish requirements. Zinc excels here for visible parts; aluminum for structural closure hardware.
  • Liftgate actuator and hinge housings
  • Mirror bracket assemblies
  • Door handle mechanisms and latch housings
  • Roof rail and trim anchors
  • Fuel filler neck housings
  • Window regulator components

Electronics and Control Systems

Modern vehicles carry more electronic systems than ever. Die cast enclosures protect sensitive electronics while managing heat and meeting EMI shielding requirements for ADAS and connected vehicle platforms.
  • ECU housings and heat spreaders
  • Infotainment system brackets
  • LiDAR and camera mounting housings
  • Power selector and gear selector bodies
  • Actuator housings for brake and steering
  • Connector and relay housings

Commercial and Off-Road Vehicles

Heavy-duty and off-road applications demand die castings that perform under higher loads, longer duty cycles, and harsher environmental exposure than standard automotive programs.
  • Heavy-duty gearbox and transfer case housings
  • Hydraulic valve bodies for work equipment
  • Cab structural nodes and console housings
  • Train and rail system component housings
  • Agricultural equipment control housings
  • Compressor and pump housings

Certified Quality You Can Document

IATF 16949 for automotive and ISO 9001 for broader manufacturing. Customers receive traceability and inspection data, not just parts.

Engineering That Starts Before the Tool Is Cut

We assign engineers during the quoting phase, not after purchase order. That early involvement surfaces design issues, identifies alloy trade-offs, and confirms tooling strategy fits production volume before the program is committed.

International Facilities, Consistent Output

Manufacturing locations span North America and international markets including Taiwan and Asia-Pacific. Each facility operates to the same quality standards consistent supplier relationship regardless of which plant serves the program.

Recycled Materials, Reduced Footprint

Aluminum, magnesium, and zinc die casting alloys are among the most recyclable structural metals available. Post-industrial scrap is recaptured and returned to the alloy cycle. Sustainability goals and performance targets can coexist rather than compete.